Our first update of 2026 is no small feat with the successful deployment of SMAP’s first X-BU at the Adelaide branch.
The X-BU is a next-generation branching unit designed to integrate both electrical and optical switching sea cases into a single wet body for high fibre count systems, such as SMAP’s 16 fibre pairs. This innovation simplifies deployment and O&M, eliminating the need for multiple, separately spaced wet bodies to enable independent recovery during repairs.
Branching unit on deck
A high degree of engineering was required to integrate these functions in a single wet body that can be safely deployed and recovered in deep water as the entire X-BU weighs over 1,500 kg and is more than 6.5m long – making handling on deck complex and requiring careful deployment and recovery to keep the cable within it’s normal safe working tension.
Electrical switching functions allow for reconfiguration of the system’s powering, usually in case of a shunt fault where the system may need to be powered from an alternate location, or to electrically isolate a faulty section of the system for repair whilst keeping other sections powered.
Optical switching allows for fibre pairs to be switched between either to trunk or to the branch, allowing some fibre pairs to bypass the branch, while other fibre pairs add and drop at the branch.
The Adelaide X-BU is deployed at water depths exceeding 5,000 m – making it the deepest X-BU deployed in the world to date. This achievement reflects the cutting-edge engineering and meticulous planning involved in the SMAP system.
Stay tuned for more updates.