Category Archives: SMAP Build

SMAP mid-year project update – June 2025

As we reach the mid-way point of 2025, SMAP continues to gain momentum, moving from planning and preparation into full-scale execution. This year has been marked by major achievements across regulatory approvals, system design, construction milestones, and now, the critical start of marine cable installation with the successful cable landing in Perth last week. With […]

Front haul works now underway at Torquay

Img 2818

Construction of the front haul network is now underway in Torquay, marking an important milestone for the project. ​ ​ Our contractor UGL Pty Ltd has commenced groundworks following the successful completion of land access negotiations with relevant stakeholders, including property owners, local council and utility providers. This collaboration has ensured that all necessary approvals […]

SMAP cable makes landfall in Perth

This week marked a major moment for the SMAP project, with the successful shore-end landing of the cable system in Perth.  The OMS shore-end and dive support teams were on site early to prepare for the landing. With the beach manhole and existing infrastructure ready, final checks were carried out on the seaward-facing conduit, which […]

Walls go up at Torquay CLS

Exciting progress continues at the Torquay Cable Landing Station, with a significant milestone now achieved – the installation of all 49 internal and external walls, along with 38 hollow-core roof planks. This marks a pivotal step forward in the construction phase, as the facility begins to take on its final structural form. The installation of […]

Adelaide CLS foundations in place

SUBCO construction site of Cable Landing Station with concrete slab poured

The Adelaide Cable Landing Station is now taking shape with another milestone reached with competition of the slab construction. ​ Our building contractor, Sagle, has worked diligently to bring us to this stage of the project. While the completed slab may appear minor at first glance, it represents a significant milestone – the successful completion […]

Cable loading 100% complete

Last week we hit a major milestone for SMAP, with 100% completion of cable loading onto the ship before it sets sail for Australian shores.  Quality Assurance/Field Services rep, Paddy Cunningham gives us an inside look at the process of getting over 5,000km of cable loaded, and life onboard the Île d’Yeu.  “With SMAP manufacturing […]

Mobilisation begins in Torquay for final SMAP ocean outfalls

Default

Mobilisation has commenced at our Torquay sites for the next stage of the SMAP project, a significant step forward in the delivery of Australia’s first hyperscale subsea cable.   UEA has begun preparing two key locations in Torquay, Victoria, in the lead up to construction works that will deliver the final ocean outfalls for SUBCO’s […]

CLS install complete in Sydney

CLS install complete in Sydney   After months of planning, we hit the ground running at Equinix SY5 to bring our new cage online. Over five days, our team – alongside a rotating cast of contractors – rolled in racks, configured systems, wired everything from LEDs to locks, and fine-tuned the security infrastructure. This blog, written […]

SUBCO celebrates commencement of HDD works on the first subsea cable in Victoria

Dsc04692

Yesterday we held a historic event in Torquay, Victoria to mark the end of design and planning to build phase, for the first subsea cable in the state. Torquay being the last piece of the puzzle to complete for the SMAP cable, SUBCO’s 5,000km transcontinental, fully armoured subsea cable that will connect Sydney, Melbourne (Torquay), […]

CLS construction commences in Adelaide

We’re excited to announce that construction is now officially underway on the Cable Landing Station (CLS) in West Beach – Adelaide, marking another critical milestone in the SMAP submarine cable project. The CLS site, located on a 20m x 20m block, has now been fully cut and prepared for the next phase of development. Bored […]